Finding the Best Framers Tool Belt For You

Introduction

People think that a framer comes to a job site with a circular saw and a sledgehammer and without much finesse tries to smash a house together as fast as possible. But actually, to be a good framer requires great attention to detail and the ability to visualize the finished house just by looking at the studs.

It’s essential to get the angle of the corners just right and make sure all the walls are plumb and level. All this while working on a tight time schedule. To be able to do this you must have a good quality tool belt on your hips to speed up production.

A Nice One

q? encoding=UTF8&MarketPlace=US&ASIN=B0000DYVHZ&ServiceVersion=20070822&ID=AsinImage&WS=1&Format= SL250 &tag=rasmus03 20

Custom leather craft

Heavy-duty, heavy weight

Read Our Review

0%

Editors Choice

q? encoding=UTF8&MarketPlace=US&ASIN=B00GK4TYUW&ServiceVersion=20070822&ID=AsinImage&WS=1&Format= SL250 &tag=rasmus03 20

Bucket boss

All the pockets, and some

Read Our Review

0%

Best Value

q? encoding=UTF8&MarketPlace=US&ASIN=B001P30BUK&ServiceVersion=20070822&ID=AsinImage&WS=1&Format= SL250 &tag=rasmus03 20

DeWalt

Smallest, but that doesn’t mean anything

Read Our Review

0%

As a framer, you often move around the whole house quite quickly doing everything from raising walls to roof joists. Just imagine standing on top of the house and realize you forgot your hammer down at the saw station, that just isn’t time you can afford to lose. There are a few things to look for when choosing a tool belt for this task, a dedicated hammer loop, large pouches for nails, and suspenders if you are planning to fill it up and wear it all day.

To find a tool belt like that with great quality can be time-consuming and boring, so we have made it easier for you by putting three tool belts head to head against each other in this review.

LeatherCraft 23 pocket framers 5-piece combo tool belt system

  • Material

    Polyester

  • Weight

    4,49 Pounds

  • Pockets

    23

q? encoding=UTF8&MarketPlace=US&ASIN=B0000DYVHZ&ServiceVersion=20070822&ID=AsinImage&WS=1&Format= SL250 &tag=rasmus03 20

If you want everything and more, you should have a look at the LeatherCraft 23 Pocket Framers Combo Tool Belt. This setup offers all you need and more. Big roomy pouches and padded suspenders all connected to an ergonomic belt. This thing is really made to sit on the hips all day long.

Awesome

Less Awesome

Bucket Boss Air Lift Suspension Rig

  • Material

    Other

  • Weight

    3,35 Pounds

  • Pockets

    Enough

q? encoding=UTF8&MarketPlace=US&ASIN=B00GK4TYUW&ServiceVersion=20070822&ID=AsinImage&WS=1&Format= SL250 &tag=rasmus03 20

If you want all the bells and whistles on your tool belt why not go with the Bucket Boss Air Lift Suspension Rig? This setup has everything you need and more, it can store all your essential tools and quite a bit more, to be honest. While doing this it sits comfortably on your hips and the suspenders takes most of the weight of. This makes it ideal for a framer who takes their job seriously and won’t compromise with equipment.

Awesome

Less Awesome

DeWalt 6 Pocket Framers Nail And Tool Bag

  • Material

    Polyester/polypropylene

  • Weight

    1,8 Pounds

  • Pockets

    6

q? encoding=UTF8&MarketPlace=US&ASIN=B001P30BUK&ServiceVersion=20070822&ID=AsinImage&WS=1&Format= SL250 &tag=rasmus03 20

If you are not carrying your tool belt on your hip for days on end and just need it for special occations, you might want to look at something a bit smaller like the DeWalt 6 Pocket Framers Nail And Tool Bag. With only one pocket to put all your tools in, you have to really choose your favorites and optimize your setup. This, however, makes the belt vey light so you can move without any restrictions with all your essential tools just right there on your hip.

Awesome

Less Awesome

There are a few things to look for when choosing a tool belt for this task, a dedicated hammer loop, large pouches for nails, and suspenders if you are planning to fill it up and wear it all day.

FAQ

Can I use these toolbelts if i'm left handed?

Most manufacturers offer both right and left-handed options.

Do you recommend using this even if I don't work as a framer

Of course, it’s all down to personal preference. These belts are just marketed as electricians tool belts. 

Final Thoughts on the Best Tool Belt for Framers

After a closer look at these tool belts and taking everything into consideration, we cannot ignore the high rating and great value of the Big Boss belt. It checks all the boxes for what a great Framer’s tool belt should be. With that said you might prefer the DeWalt for its small size and price or LeatherCrafts, no compromise carry all tool belt. Let me know what you pick.